for GPL Ghostscript 8.63 fixes the problem and allows to set the
input tray with the "-dMediaPosition=X" commmand line option for
Ghostscript. "X" is an integer number which depends on the printer
model and tray. For HP "0" is usually the printer default, "7"
automatic selection, "2" manual feed, "1" the upper, and "4" the
lower tray. Note that for PCL 6/XL these numbers are
different.<p>
</en>
</comments>
<printers>
<printer>
<id>printer/Samsung-ML-2150</id>
</printer>
<printer>
<id>printer/Samsung-ML-2150PS</id>
</printer>
<printer>
<id>printer/Samsung-ML-2151N</id>
</printer>
<printer>
<id>printer/Samsung-ML-2151NPS</id>
</printer>
<printer>
<id>printer/Samsung-ML-2152W</id>
</printer>
<printer>
<id>printer/Samsung-ML-2152WPS</id>
</printer>
<printer>
<id>printer/Samsung-ML-2250</id>
<comments>
<en>The Foomatic/ljet4d driver works with this printer. One can use the PPD File for the ML-2552W. Only 600 dpi is supported and the lighter printing tones are not visible.</en>
</comments>
</printer>
<printer>
<id>printer/Samsung-ML-2550</id>
</printer>
<printer>
<id>printer/Samsung-ML-2551N</id>
</printer>
<printer>
<id>printer/Samsung-ML-2552W</id>
</printer>
<printer>
<id>printer/Samsung-ML-7300</id>
</printer>
<printer>
<id>printer/Samsung-ML-7300N</id>
</printer>
<printer>
<id>printer/Generic-PCL_5e_Printer</id>
</printer>
<printer>
<id>printer/Generic-PCL_5c_Printer</id>
<comments>
<en>
Grayscale only.
</en>
</comments>
</printer>
<printer>
<id>printer/Generic-PCL_6_PCL_XL_Printer</id>
<comments>
<en>
Only up to 600 dpi.
</en>
</comments>
</printer>
<printer>
<id>printer/Brother-HL-1650</id>
</printer>
<printer>
<id>printer/Brother-HL-1660e</id>
</printer>
<printer>
<id>printer/Brother-HL-1670N</id>
</printer>
<printer>
<id>printer/Brother-HL-1850</id>
</printer>
<printer>
<id>printer/Brother-HL-1870N</id>
</printer>
<printer>
<id>printer/HP-LaserJet_4Si</id><!-- HP LaserJet 4Si -->
</printer>
<printer>
<id>printer/HP-LaserJet_4M</id><!-- HP LaserJet 4M -->